Axis 0213-004 Datasheet download pdf (Page 14)

AXIS 292 - Sequence Mode

Sequence Mode

The AXIS 292 displays the video from the connected sources in 2 different sequence modes - auto mode and

manual mode.

Auto sequence mode

In this mode, the video sources in the list on the Video Sources page are automatically cycled through, o

ne by

one. Auto mode can be paused and resumed by pressing the Video Select button on the front panel.

Manual sequence mode

When in manual mode, the AXIS 292 displays a single

video source and only skips to the next source when

the video select button is pressed.

Note that keeping the video select button pressed for

more than 2 seconds will disconnect the AXIS 292.

Action/event Result in auto sequence mode

Connection established. Video source displayed.

Connection to currently p

laying source is lost. Screen goes blank and, depending on the remaining display time, the decoder either tries to recon-

nect or goes to the next source. The source cache is

cleared, resulting in a new autodetection. See

also Adding a video source, on page 10.

Video select button is pressed during display. Automatic cycling is paused.

Video select button is pressed during pause. Automatic cycling is resume

d directly at the next source.

Parameters are changed. The connection cache is cleared and all sources are

autodetected again upon the next connection.

User presses Connect to bu

tton in web interface to connect

to a video source not included in the auto mode list.

The decoder connects to that source. After the display time has elapsed, the next source in the

auto list is selected.

Alarm received from video encoder. Alarm is ignored.

Action/event Result in manual sequen

ce mode

Connection established. Video source displayed.

Connection to currently p

laying source is lost. The screen goes blank and the decoder attempts to reconnect. The source cache is cleared, result-

ing in a new autodetection.

Video select button is pressed during display. Decoder cycles to next source. If th

e next source is not already cached, autodetection will occur.

Video select button is pressed during autodetect of next

sou

rce.

Autodetect is aborted on that source and the decoder attempts to go to the next source.

Parameters are changed. The connection cache is cleared and all sources are autodet

ected again, upon the next connection.

User uses Connect to bu

tton in web interface to connect to

a video source not included in the manual mode list.

The decoder connects to that source. When the video select button is pressed, the next source in

the manual mode list is selected.

Alarm notification received from video encoder. Decoder switches to display from the encoder that sent the alarm.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 29 30

Comments to this Manuals

No comments

Axis 0213-004 Datasheet Page 14

Comments to this Manuals

Related products and manuals for Decoders Axis 0213-004