Axis 0213-004 Datasheet download pdf (Page 5)

AXIS 292 - Product Description

AXIS 292 Front Panel

Indicators - After completion of the startup and self test routines, the multi-colored Network, Status, Power

and Video LED’s indicate the following:

Control Button

- Press this button to restore the factory default settings, as described on page 17.

Video Select Button

- When in manual mode, pressing this button connects to the next video source. In auto

mode, the button pauses/resumes the automatic cycling of the video sources. If the AXIS 292 is disconnected,

pressing the button makes the unit connect to the first encoder in the video source list, in both manual and

auto mode.

Notes:

•If the Motion JPEG settings in a connected video encoder are changed, you must disconnect and then reconnect that video source

for the settings to take effect.

•Holding the video select button pressed for 2 seconds will disconnect the unit.

Power Green Continuous for normal operation

Green/Amber Flashes green/amber during upgrade

Status

Green Continuous for normal operation

Green/Amber Flashes green/amber during startup

Amber Continuous when resetting to factory default

Red Continuous for hardware error

Network

Green Flashes for activity on a 100 Mbit/s network

Amber Flashes for activity on a 10 Mbit/s network

None No connection

Video

Green Continuous for video connected

Amber Continuous when connecting

Red Continuous when video disconnected

Control Video Select

Button

1 2 3 4 5 6 7 8 9 10 ... 29 30

No comments

Axis 0213-004 Datasheet Page 5