Axis 0213-004 Datasheet download pdf (Page 17)

AXIS 292 - Maintenance

Maintenance

Administrator Password

To change the password for the administrator (root), enter a new password and confirm it. Click the Apply

button.

Important!

Maintain Se

rver

This section provides tools for the following:

Restart - Click this button to restart the AXIS 292.

The settings will not change.

Restore - This button resets all paramet

ers (except IP parameters) to the factory default settings.

Default - In certain circumstances, it may be necessary to reinstate the Factory Default settings for the

AXIS

292. This is performed in one of two ways:

• click the De

fault button on the Maintenance page

• press the Con

trol button, located on the front panel, and follow the instructions below.

Both of these options will reset ALL the

parameters currently configured in the unit, i.e. network settings, etc.

Factory default settings

Follow the instructions below to reinstate the product factory default settings using the Control button:

1. Remove power to the AXIS 292.

Press and keep the Control button pressed, and reconnect power.

3. Keep the Control button pressed until the Status Indicator displays steady amber (note that this may

take up to 15 seconds), then release the button. When the Status Indicator displays green (which can

take up to several minutes) the

AXIS 292 will then have been reset to its original factory default settings.

The default password for the preconfigured user (root) should be changed as soon as possible - all

Axis products are shipped with the same default password.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 29 30

No comments

Axis 0213-004 Datasheet Page 17