Axis 0213-004 Datasheet download pdf (Page 18)

AXIS 292 - Maintenance

Upgrade Server

New firmware can be loaded into the AXIS 292 over the network. The latest version of the AXIS 292 firmware

is available free of charge from the Axis Web site at http://www.axis.com/techsup

Note: Pre-configured and customized settings will be retained for use when the new firmware is running (providing the required features

are available in the new firmware) although this is not guaranteed by Axis

Communications. Always read the upgrade instructions and release notes available with each new release, before updating the firm-

ware.

1. Obtain the latest version of the firmware from the Axis Web site and save it to your computer.

2. Open the Maintenance page in the network video decoder’s web pages.

3. In the Upgrade Server section, browse to the downloaded firmware file on your computer. Click

Upgrade. The upgrade commences, and may last for up to 20 minutes.

4. The AXIS 292 restarts automatically after the upgrade has completed.

Important!

• Be sure to read the release notes provided with each new release, before upgrading the firmware.

• The upgrade process normally takes from 30 seconds to 10 minutes, although it can also take longer.

• After starting the process, you should always

wait at least 20 minutes before power-cycling the AXIS 292 -

even if you suspect the procedure has failed.

• In case of failure, refer to Emergency Recovery Procedure, on page 20.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 29 30

No comments

Axis 0213-004 Datasheet Page 18