Axis 2110 User's Guide download pdf (Page 12)

Installing Your Camera on a Network AXIS 2110 User’s Manual

Checking the Installation From Your Browser

Having completed the installation, you should then check the connection between the

AXIS 2110 and the network, as follows:

1. Start your browser (see note below) and enter the name or IP address of your camera:

Example!

The Home Page for your AXIS 2110 is now displayed:

2. Continue the setup and configure your application using the Installation Wizard or

Administration Tools, as described in Configuring Your Camera, on page 23.

Important!

http://10.11.12.13/

• To enable the updating of images in Microsoft Internet Explorer, you must set your browser to allow

ActiveX controls, and perform a once-only installation of the Axis ActiveX component onto your

workstation. However, if your computer environment restricts the installation of additional software,

you can alternatively set your AXIS 2110 to use a Java applet for updating the images. This is done

from Image settings.

• When accessing the Admin Tools for the first time in a browser, you will not be prompted for a user-

name or password. You will be assumed to be the Administrator and will automatically be logged on

as such, with the username root

and the default password pass. This root password must, however,

be changed as soon as possible, to enable the security function. Also, all Axis products are shipped

with the same password as default. For more information, refer to System Security, on page 27.

Configure the unit using the Installation Wizard

or the Administration Tools.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 58 59

No comments

Axis 2110 User's Guide Page 12