Axis Q1922-E User Manual download pdf (Page 15)

AXIS Q19 Series - Accessing the camera

AMC audio controls

AMC audio buttons control the speakers and microphone connected to the computer. The buttons are only visible when audio

is enabled.

Speaker buttons – Click to switch the sound on or off.

Microphone buttons – Click to switch the sound on or off.

In Simplex - Network Camera speaker only mode, click this button to stop sending audio to the camera.

Use the slider to control the volume on the speaker and microphone.

Full-duplex mode

Simultaneous two-way audio allowing you to transmit and receive audio (talk and listen) at the same time.

There is no echo cancellation; if feedback loops appear, try moving the microphone or the speaker.

Half-duplex mode

Audio can be transmitted in both directions bet

ween the Axis product and the client computer, but only in one

direction at a time. The Talk/Listen button is used to switch between sending and receiving audio. The button

can be configured from the Audio tab in the AMC control panel:

Simplex - Thermal Network Camera speaker only mode

Audio can be transmitted in both directions bet

ween the Axis product and the client computer, but only in one

direction at a time. To send audio, the Talk and Microphone buttons must both be enabled. Click either button

to stop audio transmission.

Pan/Tilt/Zoom Controls

The Live View page also displays the Pan/Tilt/Zoom (PTZ) controls. The administrator can enable/disable controls for specified

users under System Options > Security > Users.

With the P

TZ Control Queue enabled the time each user is in control of the PTZ settings is limited. Click the buttons to

request or release control of the PTZ controls. The PTZ Control Queue is set up under PTZ > Control Queue.

Click the Emulate joystick mode button and click in the image to move the camera view in the direction of the

mouse pointer.

Click the Center mode button and click on a position in the image to center the camera view on that position.

Pan and Tilt bars – Click a position directly on the bar to steer the camera view directly to the new position in

one smooth movement or click on the arrows at the ends of th

e bars to steer the camera in steps.

Click the Ctrl panel button to open the PTZ control panel which provides additional PTZ controls.

User-defined buttons can also appear in the Control panel, see Controls, on page 29.

Select a PTZ preset position to steer the camera view to the saved position, see Preset Positions,

on page 28.

The PTZ controls can be disabled under PTZ > Advanced > Controls, see Controls, on page 29.

• Push-To-Talk mode: Click and hold the button to talk/send; release the button to listen

• Toggle mode: Click once to switch between talking and listening

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 62 63

No comments

Axis Q1922-E User Manual Page 15