Axis Q1922-E User Manual download pdf (Page 45)

AXIS Q19 Series - System Options

SMTP (email)

Enter the host names (or IP addresses) and port numbers for your primary and secondary mail servers in the fields provided, to

enable the sending of notifications and image email messages from the camera to predefined addresses via SMTP.

If your mail server requires authen

tication, check the box for Use authentication to log in to this server and enter the

necessary information. See the online help

for more information.

SNMP

The Simple Network Management Protocol (SNMP) allows remote management of network devices. An SNMP community is

the group of devices and management station running SNMP. Community names are used to identify groups.

Depending on the level of security required, select the version of SNMP to use.

SNMP v1/v2

Select either SNMP v1 that includes no security, or SNMP v2c t

hat uses very simple security.

The community name can be specified as a password for read or read/write access to all

supported SNMP objects. The

community is the group of network devices using SNMP. The default password for the Read Community is public and the

default password for the Write community is write.

Traps for SNMP v1/v2

Traps are used by the camera to send messages to a mana

gement system for important events or status changes.

If En

able traps is selected, enter the email address where the trap message is to be sent as well as the Trap community that

should receive the message.

There are four types of traps available for the network camer

• Cold start

•Warm start

•Link up

• Authentication failed

SNMP v3

SNMP v3 provides encryption and secure passwords. HTTPS mu

st be enabled. To use traps with SNMP v3 an SNMP v3

management application is required.

If the Enable SNMP v3 option is selected, provide th

e Initial user password. Note that the initial password is activated only

when HTTPS is enabled and can only be set once.

If HTTPS is enabled, SNMP v1 and

SNMP v2c should be disabled.

When the SNMP configuration is ready, click Save to u

se the new settings. Click Reset to return to the default values.

UPnP™

The network camera includes support for UPnP™. UPnP™ is enabled by default, and the network camera then is automatically

detected by operating systems and clients that support this protocol.

RTP/H.264

These settings are the port range, IP address, port number (video and audio), and Time-To-Live value to use for the video

stream(s) in multicast H.264 format. Only certain IP addresses and port numbers should be used for multicast streams. For

more information, please see the online help .

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 62 63

Comments to this Manuals

No comments

Axis Q1922-E User Manual Page 45

Comments to this Manuals

Related products and manuals for Security cameras Axis Q1922-E