Axis P3367-VE User Manual download pdf (Page 36)

AXIS P3367–VE Fixed Dome Network Camera

System Options

To change the date and time settings, select the preferred Time mode under New Serve r Time:

• Synchronize with computer time sets date and time according to the computer’s clock. With this option, date a nd

time are set once and will not be updated automatically.

• Synchronize with NTP Server obtains date a nd time from an NTP server. With this option, date and time settings are

updated continuously. For information on NTP settings, see NTP Conﬁguration, on page 37.

If using a host name for the NTP server, a DNS server must be conﬁgured. See DNS Conﬁguration, on pa ge 37.

• Set m anually allows you to m anually set date a n d time.

If using an NTP server, select your Time zone from the drop-down list. If required, check Automatically adjust for daylight saving

time changes.

The Date & Time Format Used in Images is the date and time format displayed as a text overlay in the video stream. Use the

predeﬁned formats or see File Naming & Date/Time Formats in the online help

for information on how to create custom date and

time formats. To include date and time in the overlay text, go to Video & Audio and select Include date and Include t ime.

Network

Basic TCP/IP Settings

The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously, and at least one version

must always be enabled.

IPv4 Address Conﬁguration

By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP. The IPv4 settings are

conﬁgured under System Options > Network > TCP/IP > Basic.

DHCP (Dynamic Host Conﬁguration Protocol) allows network administrators to centrally manage and a utomate the assignment of IP

addresses. DHCP should only be enabled if using dynamic IP address notiﬁcation,oriftheDCHPcanupdateaDNSserver,which

when allows you to access the Axis product by name (host name).

If DH CP is enabled and the product cannot be accessed, ru n AXIS IP Utility to search the network for connected Axis products, or reset

the product to the factory default settings (see page 43) and then perform the installation again.

To use a static IP address, check Use the following IP address and specify the IP address, subnet mask and default router.

IPv6 Address Con ﬁguration

If IPv6 (IP version 6) is ena ble d, the Axis product will receive an IP address according to the conﬁguration in the network router.

To enable IPv6, go to System Options > Network > TCP/IP > Basic. Other settings for IPv6 should be conﬁgured in the network router.

ARP/Ping

The IP address can be set using ARP a nd Ping. Fo r instructions, see the product’s Installation Guide.

ARP/Ping is enabled by default. To disable, uncheck the box under System Options > Network > TCP/IP > Basic.

The ARP/Ping service is automatically disabled two minutes after the product is started, or as soon as an IP address is set. To reset the

IP address, the product must be restarted to activate ARP/Ping for an additional two minutes.

Pinging the product is still possible when this service is disabled.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 53 54

No comments

Axis P3367-VE User Manual Page 36