Axis P3367-VE User Manual download pdf (Page 39)

AXIS P3367–VE Fixed Dome Network Camera

System Options

Note

This FTP server has nothing to do with the product’s ability to transfer images via FTP to other locations and servers.

RTSP

The RTSP server running in the Axis product allows a connecting client to start an H.264 stream. The RTSP port number can be

changed under System Options > Network > TCP/IP > Advanced. The default port is 554.

Note

H.264 vide o streams will not be available if t he RTSP server is disabled.

SOCKS

SOCKS is a networking proxy protocol. The Axis product can be conﬁgured to use a SOCKS server to reach networks on the other

side of a ﬁrewall or proxy server. This functionality is useful if the Axis product is located on a local network behind a ﬁrewall, and

notiﬁcations, uploads, alarms, etc need to be send to a destination outside the local network (for example the Internet).

SOCKS is conﬁgured under System Options > Network > SOCKS. For more information, see the online help

QoS (Quality of Service)

QoS (Quality of Service) guarantees a certain level of a speciﬁed resource to selected trafﬁc on a network. A QoS-aware network

prioritizes network trafﬁc and provides a greater network reliability by controlling the amount of bandwidth an application may use.

TheQoSsettingsareconﬁgured under System Options > N etwork > QoS. Using DSCP (Differentiated Services Codepoint) values, the

Axis product can mark the following types of trafﬁc: live video, live audio, e vent/alarm trafﬁc and m anag ement traf ﬁc.

Note

Live audio DSCP will be equal to live video DSCP if H.264 over RTSP is used.

SMTP (email)

To send event and error email messages from the Axis product via SMTP (Simple Mail Transfer Protocol), an SMTP mail server must be

set up. This is done under System Options > Network > SMTP (email).

Enter the host names or IP addresses and port numbers for the primary and secondary mail servers in the ﬁelds provided. A From

email address is also required. If the mail server requires a

uthentication, check Use authentication to log in to this server and enter

the necessary information.

SNMP

The Simple Network Management Protocol (SNM P) allows remote management of network devices. A n SNMP com munity is the

group of devices and management stati

on running SNMP. Com munity name s are used to identify groups.

The Axis product can be conﬁgured

to support SNMP on the System Options > Network > SNMP page.

Depending on the level of sec

urity required, select the version on SNM P to use.

SNMP v1/v2 provides the

lowest level of security. The community name can be speciﬁed as a password for re ad or read/write

access to all supported SNMP devices. The default password for the Read community is public and the default password for the

Write community is write.

Note

If HTTPS is enabled, SNMP v1 and SNMP v2c should be disabled.

Traps for SNMP v1/v2 ar e used by the Axis product to s end messages to a management system on im portant events and status

change

s. Check Enable traps and enter the IP address where the trap message should be sent and the Trap community that

should receive the message.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 53 54

Comments to this Manuals

No comments

Axis P3367-VE User Manual Page 39

Comments to this Manuals

Related products and manuals for Security cameras Axis P3367-VE