Axis P3367-VE User Manual download pdf (Page 6)

AXIS P3367–VE Fixed Dome Network Camera

Hardware overview

Digital Input

Connect to GND to activate, or leave ﬂoating (unconnected)

to deactivate.

0to+40VDC

Digital Output

Internal connection to ground when activated, ﬂoating

(unconnected) when deactivated. If used with an external

relay, a diode must be connected in parallel with the load, for

protection against voltage transients.

Max load =100 mA

Max voltage = +40 V DC

LED indica tors

LED

Color

Indication

Green

Steady for connection to a 100 MBit/s network. Flashes for network activity.

Amber

Steady for connection to a 10 MBit/s network. Flashes for network activity.

Network

Unlit No network connectio n.

Green Steady green for normal operation.

Amber

Steady during startup and when restoring settings.

Status

Red

Slow ﬂash for fail

ed upgrade.

Green

Normal operation.

Power

Amber

Flashes green/amber during ﬁrmware upgrade.

Note

• The Status LED can be conﬁgured to be unlit during normal operation, or to ﬂash only when the product is accessed. To

conﬁgure, go to Setup > System Options > Ports & Devices > LED. See the online help for more information.

• The Status LED can be conﬁgured to ﬂash while an event is active.

• The Status LED can be conﬁgured to ﬂash for identifying the unit. This can be done under Setup > System Options >

Maintenance.

1 2 3 4 5 6 7 8 9 10 11 ... 53 54

No comments

Axis P3367-VE User Manual Page 6