Axis P3367-VE User Manual download pdf (Page 38)

AXIS P3367–VE Fixed Dome Network Camera

System Options

Link-Local IPv4 Address

Link-Local Address is enabled by default and a ssigns the Axis product an additional IP address which can be used to a ccess

the p roduct from other hosts on the same segment on the local network. The product can have a Link-Local IP and a static

or DHCP-supplied IP address at the sam e time.

This function can be disabled und er System Options > N etwork > TCP/IP > Advanced.

HTTP

The HTTP port used by the Axis product can be changed under System Options > Network > TCP/IP > Advanced. Any port in the

range 1024–65536 can be used. The default setting is 80.

HTTPS

The HTTPS port used by the Axis product can be changed under System Options > Network > TCP/IP > A dvanced. Any port in the

range 1024–65536 can be used. The default setting is 443.

To enable HTTPS, go to System Options > Security > HTTPS. For more information, see page 34.

NAT traversal (port mapping) for IPv4

A network router allows devices on a private network (LAN) to share a single connection to the Internet. This is done by forwa rding

network trafﬁc from the private network to the “outside”, that is, the Internet. Security on the private network (LAN ) is increased

since most routers are pre-conﬁgured to stop attempts to access the private network (LAN) from the public network (Internet).

Use NAT traversal when the Axis product is located on an intranet (LAN) and you wish to make it available from the other

(WAN) s ide of a NAT router. With NAT traversal properly conﬁgured, all HTTP trafﬁc to an external HTTP port in the NA T router

isforwardedtotheproduct.

NAT traversal is conﬁgured under System Options > Network > TCP/IP > Advanced.

Note

• For NAT trave rs al to work, this must b e supported by the router. The router must also support UPnP

• The router has many different names: “NAT route r”, “Network router”, “Internet Gateway”, ”Broadband router”, “Broadband

sharing device” or “Home ﬁrewall” but the essential purpose of the device is the sa

me.

Enable/Disable - When enabled, the Axis product attempts to conﬁgure po rt mapping in a N AT router on your network, using UPnP

Note that UPnP

must be enabled in the product (see System Options > Network > UPnP).

Use manually selected NAT router - Select this option to manually select a NAT router and enter the IP address f or the router in

the ﬁeld. If no router is speciﬁed, the product automatically searches for NAT routers on your network. If more than one router is

found, the default router is selected.

Alternative HTTP port - Select this option to manually deﬁne an external HTTP port. Enter the port number in the ﬁeld. If no port is

entered here, a port number is automa t ically selected when NA T traversal is enabled.

Note

• An alternative HTTP port ca n be used or be active even if NAT traversal is disabled. This is useful if your NAT router doe s

not support UPnP a nd you need to manually conﬁgure port forwarding in the NAT router.

• If you attempt to man

ually enter a port that is already in use, another available port is automatically selected.

• When the port is selected automatically it is displayed in this ﬁeld. To change this, enter a new port number and click Save.

FTP

The FTP server running in the Axis product enables upload of new ﬁrmware, user applications, etc. The FTP server can be disabled

under System Options > Network > TCP/IP > Advanced.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 53 54

Comments to this Manuals

No comments

Axis P3367-VE User Manual Page 38

Comments to this Manuals

Related products and manuals for Security cameras Axis P3367-VE