Axis P3367-VE User Manual download pdf (Page 40)

AXIS P3367–VE Fixed Dome Network Camera

System Options

The following traps are available:

•Coldstart

•Warmstart

•Linkup

• Authentication failed

SNMP v3 provides encryption and secure passwords. To use traps with SNMP v3, an SNMP v3 management application is required.

To use SNMP v3, HTTPS must be e nabled, see HTTPS, on page 34. To enable SNMP v3, check the box and provide the initial user

password.

Note

The initial password can only be set once. If the password is lost, the Axis product must be reset to factory default, see

Reset to factory default s ettings, on page 43.

UPnP

The Axis product includes support for UPnP

.UPnP

is enabled by default and the product is automatically detected by operating

systems and clients that support this protocol.

UPnP

can be disa bled under System Options > Network > UPnP

RTP/H.264

The RTP port range and multicast settings are conﬁgured under System Options > Network > RTP .

The RTP port range de ﬁnes the range of ports from which the video/audio ports are auto

matically selected. For multicast streams,

only certain IP addresses and port numbers should be used.

Bonjour

The Axis product includes support for Bonjour. Bonjour is enabled by default and the prod uct is automatically detected by operating

systems and clients that support this protocol.

Bonjour can be disabled under System Options

>Network>Bonjour.

Storage

SD card

The SD/SDHC memory card (not included) is managed on the System Options > Storage page. Click SD card to open Storage

Management.

Mounting is done automatically when the card is inserted or when the product boots. SD cards are normally preformatted when

purchased, but if needed, click Format to format the card.

Note

To pre

vent corruption of recordings, the SD card should always be unmounted before removal.

If the card’s status shows as failed, c lick Check disk to see if the problem c an be found and then try Repair.

To avoid ﬁlling the card, it is recommended to remove recordings continuously. Under Recording Settings, select Remove recordings

older than and select the number of days or weeks.

To stop writing to the share and protect recordings from being removed, select Lock und er Recording Settings.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 53 54

Comments to this Manuals

No comments

Axis P3367-VE User Manual Page 40

Comments to this Manuals

Related products and manuals for Security cameras Axis P3367-VE