Axis 950 User Manual download pdf (Page 12)

Section 2: Basic Installation

12 AXIS 850/950 User’s Manual



SCSI Devices and Termination

CD-ROM server termination set-up

The SCSI bus allows seven CD-ROM drives to be connected to the

CD-ROM server. Each unit on the SCSI bus must have an unique

SCSI address. SCSI addresses 0 through 6 can be used for the CD-

ROM drives connected to the CD-ROM server.

Termination

In order for the SCSI bus to work properly, it has to be electrically

terminated at both ends. This is usually done by attaching a

terminator plug to the last unit in the SCSI chain. Modern SCSI

drives may have built-in termination, which is activated or deactivated

using a switch on the back panel. Check the documentation for your

CD-ROM drive to see how to terminate the drive properly.

Drive terminated,

Axis CD-ROM server

termination on.

AXIS 851 or AXIS 951 with internal drive only

Drive terminated,

Axis CD-ROM server

termination off.

Not terminated



Not terminated



Last drive terminated



AXIS 851 or AXIS 951 with external CD-ROM drives connected

Axis CD-ROM server

termination on.

Not terminated



Not terminated



Last drive terminated



AXIS 850 or AXIS 950 with one or more external CD-ROM drives

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 68 69

No comments

Axis 950 User Manual Page 12