Axis 7100 Installation Guide download pdf (Page 390)

100

101

Recipe Parameters

Cut Parameters

Advanced Dicing Technologies Ltd.

A-24

Cut Parameters

Table A-9 lists the parameters in the Cut category. Cut parameters define

the way Workpieces are cut in the Model 7100.

Table A-9: Cut Parameters

Category Parameter Description

Cut Chopping Velocity

The speed of the Z-Axis (mm/sec) when performing a

chop into a Workpiece. Usually performed with the

Standard APC algorithm.

Possible Values:

min =.05, max = 2, Default =.1

Cut Chopping Z Start

The height above the workpiece, at which the spindle

switches to the chopping velocity.

Default = 20 mil (0.5 mm)

Cut Copy All Cut Map

When set to Yes, all the cut information, including

shrinkage, average index and cut angle are copied

and used.

When set to No, only the absolute angle is copied and

used (this is similar to the method before the feature

update).

Cut Cut Depth

The distance along the Z-Axis between the top of the

Workpiece and the cutting edge of the Blade in its

cutting position.

Possible Values (mm):

min =.001, max = 8, Default =.1

Cut Cut Entry Speed

The speed of the Cutting Chuck (mm/sec) in the X

direction during the entry to the Workpiece.

(See Figure A-1.)

Possible Values:

min =.01, max = 300, Default = 10

Cut Cut Exit Speed

The speed of the Cutting Chuck (mm/sec) in the X

direction during the exit from the cut.

(See Figure A-1.)

Possible Values:

min =.01, max = 300, Default = 10

Cut Cut Length

The length of each cut. This parameter is relevant

when cutting using the Standard APC algorithm.

Possible Values:

min = 0, max = 400, Default = 200

1 2 ... 385 386 387 388 389 390 391 392 393 394 395 ... 423 424

Comments to this Manuals

No comments

Axis 7100 Installation Guide Page 390

Comments to this Manuals

Related products and manuals for Servers Axis 7100